Electrical Supplies

Fire Resistance Cables LSZH 950C V

Fire Resistance Cables LSZH 950C  V

Supplied by

  • Ramcro Italy
  • 2MKablo

About

  • Fire resistant cables that keep circuit integrity and continue to operate in the presence of a fire for a specified time under defined conditions to BS standards. Ramcro builds these as RAMFIRECRO-F3 and 2MKablo as FireKab, with LPCB-certified variants in both ranges.

Application

Fire resistant cables are used when the cables are required to keep circuit integrity and continue to operate in the presence of a fire for a specified time under defined conditions.

Standards & Reference 14 cited

  • BS 6387 C-W-Z (950 °C for 3 hrs)

    A cable that has passed all three BS 6387 tests: it maintained its circuit through direct flame, through flame with water spray, and through flame with mechanical shock. The grade specified for life-safety circuits.

  • BS 8434-2

    The enhanced fire survival test for small cables in alarm systems, used where BS 5839-1 calls for enhanced grade.

  • EN 50200

    Fire resistance of the small cables used in emergency circuits: alarm, detection and evacuation wiring, tested for circuit survival rather than flame spread.

  • BS 5839-1

    The British code of practice for fire detection and alarm systems in non-domestic buildings: what decides which cable grade a circuit needs.

  • IEC 60331-21

    Circuit integrity under fire: whether a cable keeps carrying current while it burns. This is the property that separates a fire-resistant cable from a merely flame-retardant one.

  • IEC 60332-1

    Flame propagation on a single vertical cable. It shows the cable will not carry a fire along its own length, which is the minimum expected of any cable in an occupied building.

  • IEC 60332-3-24

    Flame spread on a bundle of cables in a vertical tray, Category C. A cable can pass the single-cable test and still spread fire when hundreds are bunched in a riser, which is what this addresses.

  • IEC 61034

    Smoke density from a burning cable, measured in a sealed chamber. Low smoke is an evacuation requirement: people leave a building by sight.

  • IEC 60754-1

    How much halogen acid gas the cable gives off when it burns. Halogen-free matters where people or sensitive equipment share the space with the cable.

  • IEC 60754-2

    The acidity and conductivity of the gases a burning cable produces: in effect, how corrosive the smoke is to the building and its equipment.

  • BASEC

    Independent British cable approval: verification that a cable is made to the standard its printing claims.

  • LPCB Certified

    Third-party certification by the Loss Prevention Certification Board, whose Red Book listing is widely called for on life-safety products in the Gulf.

  • RoHS & REACH

    Made within both the EU restrictions on hazardous substances in electrical equipment and the wider EU chemical registration and authorisation regime.

Also citedBS 7629-1:2015

Documents

Request for quotation

Get a price for this item

Send the quantity and the project. Our sales engineers reply with a quotation, usually within one working day.

More in this line

Special Cables

8 products

View All